Batch BeaconUK recalls and safety alerts

Product recallOPSS

J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model 4T-AF1 recalled over an injury risk

Cuts and injuriesHigh risk

Product Recall for J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle presenting a high risk of injuries.

  • J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model 4T-AF1: photo 1 of 2 from the OPSS notice of 23 May 2025
    Product image from the OPSS safety notice
  • J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model 4T-AF1: photo 2 of 2 from the OPSS notice of 23 May 2025

Check your product

Only products that match these details are covered. Have your pack in front of you.

1 identifier listed for this notice.

  • J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model 4T-AF1

    ModelOn the rating label, base, back or box.
    • 4T-AF1 featuring Green Lever auto-tilt function

What to do now

J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model has been reported because it could hurt the person using it.

  1. Stop using it.
  2. Read the corrective action below: some notices offer a fix rather than a return.
  3. Contact J&J Conversions Limited or the shop you bought it from to arrange the remedy set out in the notice.
  4. Incidents and injuries can be reported to Trading Standards via the Citizens Advice consumer helpline.

Why it matters. Products that break, pinch, cut or fail suddenly can cause injuries ranging from cuts to fractures.

Refunds, repairs and replacements

Stop using the product first, then arrange the remedy. A recall applies to every affected unit, however long ago it was bought.

If the business does not respond, the Citizens Advice consumer helpline (0808 223 1133), Advice Direct Scotland (0808 164 6000) or Consumerline (0300 123 6262) can help.

From the official notice

Published by the Office for Product Safety and Standards (2505-0103). Quoted as issued.

Summary

Product Recall for J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle presenting a high risk of injuries.

The risk

The product presents a high risk of injuries due to the green auto-tilt lever. This lever operates a hydraulic ram to raise and tilt the slide bed during deployment. When the Green Lever is released, the bed does not hold in the raised position and falls under its own weight back to the chassis. The tilt system is also not fitted with devices to prevent a gravity fall or uncontrolled movement in the event of hydraulic failure. A risk of serious injury to operators and other persons may arise from impact with the slide bed, or from crushing between the slide bed and vehicle chassis and other fixed structures such as storage lockers.

The machine did not satisfy the requirements of The Supply of Machinery (Safety) Regulations 2008.

Action taken

The product has been recalled from end users and withdrawn from the market.

Advice to consumers

Recall and withdrawal of the product.

The manufacturer has voluntarily suspended further sale of recovery vehicles featuring the Green Lever auto-tilt function.

The manufacturer has also voluntarily initiated a recall of recovery vehicles featuring the Green Lever auto-tilt function from end users. The auto-tilt function will be permanently disabled and hydraulic burst valves will be installed. The manufacturer has provided instruction to users on how to take immediate action to remove the Green Lever as an interim measure. Users should contact J & J Conversions Limited for advice and to make arrangements for the modifications to be carried out.

Additional information

PSD notification number: 2505-0103

Notified by: Health and Safety Executive

Product description

The F1 Low Approach Slide Bed is vehicle mounted machinery used in the recovery of casualty vehicles. The slide bed is hydraulically powered. Models produced since 07 September 2021 (including Model 4T-AF1) feature a green auto-tilt lever which controls upward tilting of the slide bed for use during deployment.

Open the OPSS notice

Questions

Why has J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model been recalled?

J&J Conversions F1 Low Approach Slide Bed Recovery Vehicle Model has been reported because it could hurt the person using it. Products that break, pinch, cut or fail suddenly can cause injuries ranging from cuts to fractures.

How do I know if my product is affected?

Compare the model on your product with the details listed under “Check your product” on this page. Only items that match are covered by the notice.

What should I do now?

Stop using it. Read the corrective action below: some notices offer a fix rather than a return.

Can I get a refund or a repair?

Stop using the product first, then arrange the remedy. A recall applies to every affected unit, however long ago it was bought. If the business does not respond, the Citizens Advice consumer helpline (0808 223 1133), Advice Direct Scotland (0808 164 6000) or Consumerline (0300 123 6262) can help.

Related notices