Batch BeaconUK recalls and safety alerts

Vehicle recallDVSA

Jaecoo Omoda E5, Omoda 5 and Omoda 5 HEV recalled over potential loosening of wheel hub nut

Tyres and wheels

Market feedback has identified a few limited instances of an improperly locked driveshaft nut that may cause wheel vibration and abnormal noise on Omoda 5 and E5 models.

Check your product

Only vehicles within the listed VIN ranges or build dates are covered. A franchised dealer can confirm from your VIN.

3 identifiers listed for this notice.

  • Omoda E5

    Build datesThe build or first registration date is on the V5C.
    • 25/12/2023 – 06/03/2026
    • 02/12/2023 – 30/06/2025
    Manufacturer referenceThe manufacturer’s own campaign number. Quote it to the dealer.
    • TUB-2601.022.01

  • Omoda 5

    Build dates
    • 04/07/2023 – 10/03/2026
    • 25/12/2023 – 30/06/2025
    Manufacturer reference
    • TUB-2601.022.01

  • Omoda 5 HEV

    Build dates
    • 28/08/2025 – 09/02/2026
    Manufacturer reference
    • TUB-2601.022.01

What to do now

Tyres or wheels on affected Jaecoo Omoda E5, Omoda 5 and Omoda 5 HEV may be defective.

  1. Check whether your vehicle is affected using its registration number on the GOV.UK vehicle recall checker, or ask a franchised dealer.
  2. Contact a franchised dealer to book the free repair.
  3. Keep the manufacturer’s recall letter if you receive one, and update your address on the V5C so future letters reach you.

Why it matters. Tyre and wheel failures at speed can cause loss of control.

Repairs and costs

Safety recall work is carried out by franchised dealers free of charge, whether or not you are the first owner and whether or not the vehicle is still under warranty.

If a dealer will not carry out the recall work, contact the manufacturer’s customer services and, if that does not resolve it, the DVSA.

From the official notice

Published by the Driver and Vehicle Standards Agency (R/2026/013). Quoted as issued.

Summary

Market feedback has identified a few limited instances of an improperly locked driveshaft nut that may cause wheel vibration and abnormal noise on Omoda 5 and E5 models.

Defect

Market feedback has identified a few limited instances of an improperly locked driveshaft nut that may cause wheel vibration and abnormal noise on Omoda 5 and E5 models.

Remedy

To address this issue authorised dealers are required to inspect the driveshaft nut locking condition on all affected vehicles. Where any non conformity is identified corrective measures shall be undertaken in accordance with Omoda and Jaecoo UK Limited s technical instructions.

Models

Omoda E5, Omoda 5, Omoda 5 HEV

Open the DVSA notice

Questions

Why are Jaecoo Omoda E5, Omoda 5 and Omoda 5 HEV being recalled?

Tyres or wheels on affected Jaecoo Omoda E5, Omoda 5 and Omoda 5 HEV may be defective. Tyre and wheel failures at speed can cause loss of control.

How do I know if my vehicle is affected?

Enter your registration number on the GOV.UK vehicle recall checker or ask a franchised dealer, who can check your VIN against the manufacturer’s campaign. The VIN ranges and build dates published by the DVSA are listed on this page.

What should I do now?

Check whether your vehicle is affected using its registration number on the GOV.UK vehicle recall checker, or ask a franchised dealer. Contact a franchised dealer to book the free repair.

Will the repair cost anything?

Safety recall work is carried out by franchised dealers free of charge, whether or not you are the first owner and whether or not the vehicle is still under warranty. If a dealer will not carry out the recall work, contact the manufacturer’s customer services and, if that does not resolve it, the DVSA.

Related notices