Vehicle recallDVSA
Daimler Econic 956 recalled over a steering defect
As part of our ongoing quality monitoring we have found that the weld seams on the front-axle fender carrier of Econic 956 vehicles may have been incorrectly executed. The affected front-axle fender is supported and positioned by a carrier that is firmly connected to the vehicle frame. Due to an employee error at the supplier the affected weld seams were incorrectly executed. Based on the hydropulse tests performed and taking into account the specific vehicle application “refuse collection” cracks are expected to develop in one of the three weld seams no earlier than after two years. As it cannot be ensured that the driver will notice the potential warning signs (vibrations of the fender carrier or fender or unusual noise) complete detachment of the fender cannot be ruled out. This may increase the risk of accident for following traffic.
Check your product
Only vehicles within the listed VIN ranges or build dates are covered. A franchised dealer can confirm from your VIN.
1 identifier listed for this notice.
Econic 956
- Build datesThe build or first registration date is on the V5C.
- 27/09/2024 – 30/09/2024
- Manufacturer referenceThe manufacturer’s own campaign number. Quote it to the dealer.
- SRL260907 – ECO-SCHWRC
What to do now
Some Daimler Econic 956 have a steering or suspension fault.
- Check whether your vehicle is affected using its registration number on the GOV.UK vehicle recall checker, or ask a franchised dealer.
- Contact a franchised dealer to book the free repair.
- Keep the manufacturer’s recall letter if you receive one, and update your address on the V5C so future letters reach you.
Why it matters. A failure in steering or suspension can lead to loss of control.
Repairs and costs
Manufacturers contact registered keepers using DVLA records, but letters can go astray. You can book the free repair yourself once you know your vehicle is affected.
The DVSA monitors recalls and can be contacted if a manufacturer or dealer does not act.
From the official notice
Published by the Driver and Vehicle Standards Agency (R/2026/349). Quoted as issued.
Summary
As part of our ongoing quality monitoring we have found that the weld seams on the front-axle fender carrier of Econic 956 vehicles may have been incorrectly executed. The affected front-axle fender is supported and positioned by a carrier that is firmly connected to the vehicle frame. Due to an employee error at the supplier the affected weld seams were incorrectly executed. Based on the hydropulse tests performed and taking into account the specific vehicle application “refuse collection” cracks are expected to develop in one of the three weld seams no earlier than after two years. As it cannot be ensured that the driver will notice the potential warning signs (vibrations of the fender carrier or fender or unusual noise) complete detachment of the fender cannot be ruled out. This may increase the risk of accident for following traffic.
Defect
As part of our ongoing quality monitoring we have found that the weld seams on the front-axle fender carrier of Econic 956 vehicles may have been incorrectly executed. The affected front-axle fender is supported and positioned by a carrier that is firmly connected to the vehicle frame. Due to an employee error at the supplier the affected weld seams were incorrectly executed. Based on the hydropulse tests performed and taking into account the specific vehicle application “refuse collection” cracks are expected to develop in one of the three weld seams no earlier than after two years. As it cannot be ensured that the driver will notice the potential warning signs (vibrations of the fender carrier or fender or unusual noise) complete detachment of the fender cannot be ruled out. This may increase the risk of accident for following traffic.
Remedy
As part of the planned recall campaign we intend to replace the rear fender holders on the front axle of the potentially affected vehicles.
Models
Econic 956
Open the DVSA notice
Questions
Why are Daimler Econic 956 being recalled?
Some Daimler Econic 956 have a steering or suspension fault. A failure in steering or suspension can lead to loss of control.
How do I know if my vehicle is affected?
Enter your registration number on the GOV.UK vehicle recall checker or ask a franchised dealer, who can check your VIN against the manufacturer’s campaign. The VIN ranges and build dates published by the DVSA are listed on this page.
What should I do now?
Check whether your vehicle is affected using its registration number on the GOV.UK vehicle recall checker, or ask a franchised dealer. Contact a franchised dealer to book the free repair.
Will the repair cost anything?
Manufacturers contact registered keepers using DVLA records, but letters can go astray. You can book the free repair yourself once you know your vehicle is affected. The DVSA monitors recalls and can be contacted if a manufacturer or dealer does not act.